Wax Melt Care

 Please be aware of the following wax melt safety information.

Wax Melts usage instructions: Remove all packaging and place the wax melt in the well of your melt burner. Use with an unscented tea-light or an electric burner in accordance with the manufacturer's instructions. Only burn the wax melt on a level, fire resistant surface. Do not burn for more than 4 hours at a time.

Safety: Do not put fingers or hands into the unit while lit. To reduce risk of injury, keep out of reach of children and pets. Do not leave unattended or burning out of sight. Place unit on a level and heat resistant surface away from other heat elements. Do not overfill the bowl, you can top up once the wax has melted. The burner may become hot so do not touch while in use as heated wax can burn. Allow to cool when finished using. Do not use metal objects to clean out wax as this may crack and damage the burner. See below instructions for changing your wax melts. See label on wax melts for further health and safety advice.

Wax Melt Storage: Wax melts are sensitive to light and temperature. You can avoid your wax melts from cracking and melting by storing in a cool, dry place away from direct sunlight. Keep your wax melts dust free by keeping them in their clamshells or in their sealed packaging.

Changing your Wax Melts: Historically, there are two ways that you can remove your used wax melts in order to start anew. We call it the hot or cold method - or liquid or hard.

If your burner is on and your wax is liquid, take two cotton balls, set them in the burner tray, let it absorb, and safely discard the cotton balls. This is perfect for the burners without removable lids/plugins. Then take a paper towel and wipe away any excess wax.

If your wax burner is not on and the wax has hardened, we think it is easier to remove it by turning the burner back on/relighting the tea-light for 10-30 seconds so the wax loosens in the dish and it is easier to remove as a solid piece. Apply a light amount of pressure to the melt and the melt should pop out in a semi-solid form. Be sure top wipe away any excess with a paper towel.